Electrical Adapter Schuko→CEE16A: Connect Your Ampere Point Charger to Any Standard Outlet

The Problem: Your Charger Has 3-Phase Industrial Plug, But You Only Have Standard Outlets

You have an Ampere Point charger – P35 (3.7kW) or B35 (3.5kW). They're compact, reliable, perfect for mobile charging.

But there's one issue: these chargers come with a CEE16A industrial power plug (the 3-phase connector). Your home, office, or workshop? It has standard Schuko outlets (230V).

You have three options:

1. Call an electrician to install industrial wiring – expensive, time-consuming, permanent installation
2. Buy a different charger – waste of money
3. Use this adapter – plug your charger into any Schuko outlet, instantly, safely

What Is This Electrical Adapter?

It's a smart transition piece that connects your Ampere Point charger (with CEE16A plug) to a standard Schuko socket (230V household outlet).

How it works:

1. Take your charger with the CEE16A industrial plug
2. Plug it into this adapter's receptacle
3. Plug the adapter's Schuko connector into any standard wall outlet

That's it. Your 3.7kW charger now works from a regular socket.

Why Would You Use This?

✔️ Home charging – no industrial wiring, just use what you have
✔️ Temporary installations – event, parking lot, construction site
✔️ Flexibility – move your charger between locations easily
✔️ No renovations – no electrician, no broken walls, no delays
✔️ Professional charger, standard outlet – best of both worlds

Important Limitation: Power

Maximum power from standard Schuko: 3.7 kW (230V × 16A)

Your chargers are designed for this:

• P35: 3.7 kW
• B35: 3.5 kW

This adapter delivers exactly what your charger needs – full power, no reduction. Both work at optimal capacity.

The electrical adapter "reduces" the 3-phase CEE16A connection to single-phase 230V Schuko, but maintains full power output for your charger. This is the main purpose of this adapter.

How to Use It

1. Before first use: Check your charger's plug type (should be CEE16A 5-pin)
2. Connect: Plug charger's CEE16A connector into adapter's receptacle
3. Plug in: Plug adapter's Schuko connector into any wall outlet
4. Charge: Start charging – your charger will operate at full 3.7 kW
5. Done: Unplug when finished. No special handling needed.

Technical Specifications

CEE16A Receptacle (Charger Side):

• Voltage: 230/400V 3-phase (accepts charger plug)
• Type: CEE16A
• Pins: 5P
• Protection: IP44

Internal Cable:

• Type: H05RR-F (mobile industrial cable)
• Conductors: 3×2.5 mm²
• Length: ~50 cm
• Maximum current: 16A (safety-rated)

Schuko Plug (Wall Side):

• Voltage: 230V single-phase
• Type: Schuko 2P+E
• Maximum current: 16A
• Protection: IP44

Total Power Capacity: 3.7 kW

Compatible Ampere Point Chargers

• P35 (3.7kW) – will charge at full 3.7kW with this adapter
• B35 (3.5kW) – will charge at full 3.5kW with this adapter
• Any other charger with CEE16A plug

Safety

• Certified – meets industrial safety standards
• Grounded – proper 5-pin connection with ground protection
• Protected – IP44 rated, safe against dust and moisture
• Current-limited – cable is rated for exactly this amperage, no risk of overheating

This is proper equipment, not a workaround.

What You Cannot Do

• Do not use with damaged cables or outlets
• Do not leave plugged in unattended during charging (standard safety)
• Do not use with extension cords over 10 meters (voltage drop risk)
• Do not plug multiple devices into the same outlet while using this adapter

When You Have More Power Available?

If your location has a 3-phase 16A CEE16A socket, you can plug your charger directly without an adapter – and it will work exactly the same. The adapter is specifically for locations where only standard Schuko (230V) is available.

Questions?

📧 hello@amperepoint.com – we'll help you decide if this adapter is right for your charger, or if a different solution makes more sense.